Herion Fluid Control Valves
Series 82410, Click-On Solenoid, Internally Piloted Diaphragm Valves
  • Sizes 1/4" to 2"

  • Max pressure of 230 psi (150 psi in normally open for sizes above 1 inch)

  • Min delta Pof 2 psi

  • Options include Normally Open, Manual Override, Buna, Viton or EPDM seals

  • Available with our Hazardous Duty (Class 1, Div. 1), 3800 Series Explosion Proof solenoid

  • Max fluid temperature to 300 degrees F (in sizes up to 1", series 82680)

  • Stainless steel body material (in sizes up to 1", series 82740)
  • Series 82630/82650, Force Lift Solenoid, Zero Delta P Diaphragm Valves
  • Sizes 1/4" to 1" (1/4" to 1/2" series 82630)

  • Max pressure of 230 psi (150 psi in series 82630, 115 psi for VDC in series 82650)

  • 0 psi delta P requirement

  • Buna, Viton, or EPDM seals

  • Available with Hazardous Duty (Class 1, Div 1) 3800 Series Explosion Proof solenoid (series 82650, upon request)

  • Max fluid temperature to 230 degrees F (with Viton or EPDM seal options)

  • Stainless steel body material availability (in series 82570, from 1/4" to 1/2")
  • Series 85310, Click-On Solenoid, Internally Piloted Piston Valves
  • Sizes 1/4" to 2"

  • Maximum pressure of 580 psi

  • Min delta P requirement of 8 psi

  • Options include Normally Open, Manual Override, Buna, Viton or EPDM seals

  • Available with Hazardous Duty (Class 1, Div. 1), 3800 Series Explosion Proof solenoid.

  • Max fluid temp to 400 degrees F (Series 85330. max pressure limit of 360 psi, only available in sizes up to 1")
  • Series 85010, Force Lift Solenoid, Zero Delta P Piston Valves
  • Sizes 1/2" to 2"

  • Maximum pressure of 360 psi (580 psi limit option "22")

  • Delta P requirement of 0 psi

  • Options include Normally Open, Manual Override, Buna, Viton or Teflon seals, and limit switch.

  • Available with Hazardous Duty, CENELEC Explosion Proof Coil.

  • Max fluid temp to 400 degrees F, series 85030. (Max pressure of 230 psi, 360 psi with option "22".)

  • Stainless steal body material available in sizes to 1" (Series 85050)
  • Series 82880 Motorized Proportional Fluid Control Valves
  • Proportional fluid flow control by means of 24 VDC motor with onboard electronics

  • Aperture position feedback capability

  • 0 to 10 Volt, 0 to 20 mA, or 4 to 20 mA Command Signal

  • Sizes " to 1"

  • Cv flow coefficient variability from 0 to 5.3

  • Pressure from 90% vacuum to 145 psi.

  • Buna, Viton or EPDM seal

  • Max fluid temp to 195 degrees F
  • Series 84510 / 84530, Air Actuated Angle Seat Piston Valves - Polymer Actuator Head
  • Sizes " to 2"

  • Standard Teflon piston seat seal compatible with a variety of aggressive fluids

  • Flow path design provides inherent water dampening feature and resistance to contamination

  • Stainless steel body material (series 84530)

  • Max fluid temperature of 356 degrees F

  • Max pressure of 150 psi (above 1 inch, max pressure decreases)

  • 0 psi delta p requirement

  • Field convertible to normally open or double acting

  • Option for NAMUR Standard Interface Pattern Mounting Plate
  • Series 82190 / 82290 / 82390 / 82490, Air Actuated Angle Seat Piston Valves - Metal Actuator Head
  • Sizes " to 2"

  • Standard Teflon piston seat seal compatible with a variety of aggressive fluids

  • Flow path design provides inherent dampening feature with resistance to fluid contamination

  • Stainless steel body material (series 82390 / 82490)

  • Max fluid temperature of 356 degrees F (Options to 400 degree F, 446 degree F in Series 83230)

  • Max pressure capability of 150 psi for all sizes through 2 inch (Increased pressure capability in certain sizes)

  • 0 psi delta P requirement
  • Series 9600 3 Way Direct Acting
  • 1/4" porting, brass 3/2 in normally closed and open.

  • 2 mm to 5 mm orifice, with 100 psi capability across the range.

  • EPDM, Viton and Buna N available seal material.

  • Same coil flexibility as on the 2/2 series

  • Direct acting, solenoid operated.
  • Series 24011 Universal 3-Way Direct Acting
  • Universal operation as NO, NC, selector or diverter valve.

  • Available in stainless steel and brass.

  • Direct acting, solenoid operated.

  • No minimum pressure drop required.

  • Suitable for use on vacuum.

  • Max pressure of 150 psi.

  • Available with manual override and reset.

  • Options include seal materials, hazardous duty coils, and NAMUR mount versions.
  • Series 25003 4 Way (5/2) Direct Acting
  • Available in stainless steel and brass

  • Direct acting, solenoid operated

  • No minimum pressure drop required

  • Suitable for use on vacuum

  • Max pressure of 150 psi

  • Available with manual override and reset
  •  


    Manufacturing Solutions, Inc. - Corporate Ofice
    P.O. Box 427
    Lawrenceburg, TN  38464
    Office:  (931) 762-8773
    Fax:  (931)766-0083

    sales@mfg-sol.com

     
    email to sales@mfg-sol.com