REES 04953-121, Cable/Rope Operated Switch
List Price $658.30 Back to Store / REES
Features/Applications
The following “slack cable” style switch has 1 NO and 1 NC contact. This switch is particularly competent for use in Emergency Stop applications as well as for ordinary circuit control.
The housing is made from high quality die-cast aluminum and powder coated painted yellow. The independently operating red indicating flag rotates 90 degrees when tripped. Manually returning the flag to its normal position resets the switch.
- Manual reset with “Positive Break” contacts
- Gold plated contacts eliminate high resistance tarnishing
- Left Hand Pull
- Nema 4X (indoor), IP 66
Each captive terminal will accept (2) #14 AWG stranded wires. Each switch is supplied with a fibreflex gasket which provides an oil tight seal upon installation. For added protection against corrosive environments a neoprene gasket is available as an accessory item by ordering part number 02005-540.
There are two ½ NPT conduit openings. The maximum cable recommended cable length is 200 feet with a maximum interval support of 10 feet.
The mechanical life of the switch is 150,000 operations.
This switch can be installed on various conveyor installations and provides a constant access for emergency or normal stopping.
The rugged construction and long term reliability makes this cable pull switch well suited to function within various environments.
Electrical Ratings
“HEAVY DUTY – A600 / N150”
Listed under UL 508 – File # E 58589
Certified under CSA C22.2 – File # LR 3648
CE Compliant IEC/EN 60947-5-1
Environmental Temperature Range
Operating: +32oF to +131oF (0oC to +55oC)
Storage: -40oF to +185oF (-40oC to +85oC)
Note: Operating temperatures at 0oC are based on the absence of freezing moisture and liquids.
| Normal Potential | Normal Current | Inrush Current |
| 110-120 aca volts | 6.0 amp. | 60.0 amp. |
| 220-240 aca | 3.0 amp. | 30.0 amp. |
| 440-480 aca | 1.5 amp. | 15.0 amp. |
| 550-600 aca | 1.2 amp. | 12.0 amp. |
| 115-125 dcb | 2.2 amp. | ----- |
a Power factor 0.35 or less
b Inductive loads as specified in Section 125 of Industrial
Control Devices, Controllers and Assemblies, ANSI /
NEMA ICS 2-1988
|
|||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||
More Images
Warning - Danger(PDF, 77KB)
Glossary of Common Terms(PDF, 234KB)
Cable/Rope Operated Switches Product Line Review(PDF, 471KB)
Rating Codes(PDF, 28KB)
Installation Instruction Sheet(PDF, 775KB)
