REES 02182-202, 2.25 inch Mushroom Plunger with Spring Latch    ree rees electrical controls logo

REES 02182-202, 2.25 inch Mushroom Plunger with Spring Latch

List Price $316.50                              Back to Store / REES

Features/Applications

The following switch is a hand operated, spring latchable, control circuit device, rated ‘Heavy Duty’ normally for use with electromagnetic equipment.  The yellow cover, painted with a dry powder paint, is made from die-cast zinc.  The red mushroom plastic plunger is molded from DuPont Delrin 100ST Acetal for improved impact resistance and is solid color throughout. 

  • Gold plated contacts eliminate high resistance tarnishing
  • Plated steel latch plate has a 0.29” hole for insertion of a padlock
  • Complies with IEC/EN 60947-5-5 for ‘emergency stop’ applications
  • Nema 12/13, IP 65

Each captive terminal will accept (2) #14 AWG stranded wires. Each switch is supplied with all mounting hardware and a solid neoprene rubber gasket which provides an oil tight seal upon installation.  The mechanical life of this device is 500,000 operations. 

This switch can be found in a variety of uses on industrial machines.  Presses and press brakes use them as “STOP” buttons.

Electrical Ratings

“HEAVY DUTY – A600 / N300”

Listed under UL 508 – File # E 58589

Certified under CSA C22.2 – File # LR 3648

CE Compliant IEC/EN 60947-5-5

Third party certified under DEMKO File # FI-17205

Environmental Temperature Range

Operating:  +32oF to +131oF (0oC to +55oC)

Storage:  -40oF to +185oF (-40oC to +85oC)

Note:  Operating temperatures at 0oC are based on the absence of freezing moisture and liquids.

Normal Potential Normal Current Inrush Current
110-120 acvolts 6.0 amp. 60.0 amp.
220-240 aca 3.0 amp. 30.0 amp.
440-480 aca 1.5 amp. 15.0 amp.
550-600 aca 1.2 amp. 12.0 amp.
115-125 dcb 2.2 amp. -----
230-250 dcb 1.1 amp. -----

 Power factor 0.35 or less

 Inductive loads as specified in Section 125 of Industrial

   Control Devices, Controllers and Assemblies, ANSI /

   NEMA ICS 2-1988

 

Specifications  

Plunger Color

Red

Cover Color

Yellow

Operating Force

9.5 lb

Lock Hole Diameter

0.29 in

Latch/Plunger Operation

Push to Latch,Travel limited from neutral to depressed. Push latch to return to normal

Positive Opening Contact

 

Contact Arrangement

#09 NO + NC

Contact Type

Slow-Make Slow-Break

Approx. Shipping Weight

1.55 lb

Old Catalog Number

664

Switches comply with

IEC/EN 60947-5-5 for Emergency Stop Applications

 

More Images

Dimensional Drawing

Contact Arrangement

Back View

 Warning - Danger(PDF, 77KB)

 Glossary of Common Terms(PDF, 234KB)

 Single Plunger Product Line Review(PDF, 419KB)

 Rating Codes(PDF, 28KB)

 Installation Instruction Sheet(PDF, 35KB)