Rees Cable Operated Switches with Latch Plates

Features

The following “slack cable” style switches has 2 NO and 2 NC contacts.   These switches are particularly competent for use in Emergency Stop applications as well as for ordinary circuit control.

WARNING:  Before purchasing this product, read MSI'S Safety Component Disclaimer.

The housing is made from high quality die-cast aluminum and powder coated painted yellow. The latch plate on this switch engages when switch is tripped. Pulling on rope or cable attached to the latch plate will reset the switch.

Each captive terminal will accept (2) #14 AWG stranded wires. Each switch is supplied with a fibreflex gasket which provides an oil tight seal upon installation. For added protection against corrosive environments a neoprene gasket is available as an accessory item by ordering part number 02005-540.

There are two ½ NPT conduit openings. The maximum cable recommended cable length is 200 feet with a maximum interval support of 10 feet.

The mechanical life of the switch is 150,000 operations.

These switches can be installed on various conveyor installations and provides a constant access for emergency or normal stopping. Ideally suited for overhead installations.

The rugged construction and long term reliability makes these cable pull switches well suited to function within various environments.

Trip Force per End:  25 lb.
Operating Force Between 10ft. Supports:  6.0 lb
NEMA, UL IP Class:  4X IP65
Reset Type:  Manual
Contact Arangement:  (2) NO + NC (Make - Before - Break)

Electrical Ratings

“HEAVY DUTY – A600 / N150”
Listed under UL 508 – File # E 58589
Certified under CSA C22.2 – File # LR 3648
CE Compliant IEC/EN 60947-5-1

Environmental Temperature Range

Operating: +32^oF to +131^oF (0^oC to +55^oC)
Storage: -40^oF to +185^oF (-40^oC to +85^oC)

Note: Operating temperatures at 0^oC are based on the absence of freezing moisture and liquids

 
Contact blocks and flags are field replaceable