Rees Cable Operated Switches with Double Flag Indicator(s) with (2) NO / NC (Make-Before-Break), with Latch Plates

Features

The following switch is a “slack cable” style with 2 NO and 2 NC make-before-break contacts on each end.The switch can be used for Emergency Stop applications as well as for ordinary circuit control. The housing is made from high quality die-cast aluminum and painted with a yellow dry powder paint. Pulling on rope or cable attached to the latch plates will reset the switch. There are two 3/4" NPT conduit openings. The maximum recommended cable length is 200 feet on each end with a maximum interval support of 10 feet. The mechanical life of these devices is 150,000 operations. Each captive terminal on the replaceable contact block will accept (2) #14 AWG stranded wires and the contacts are gold plated to eliminate high resistance tarnishing. These devices can be found on various conveyor installations. The rugged construction and long term reliability make these cable switches extremely well suited to function within various industrial environments.

The switch come with a standard fibreflex cover gasket. For added protection against corrosive environments a replacement neoprene gasket, part number 02005-540, may be ordered.

WARNING:  Before purchasing this product, read MSI'S Safety Component Disclaimer.

 Electrical Ratings
"HEAVY DUTY - A600 / N150”
Listed under UL 508 - File # E 58589
Certified under CSA C22.2 - File # LR 3648
CE Compliant IEC/EN 60947-5-1

Trip Force:  25 lb
Flag End Replaceable:  Latch Plate Both Ends
Operating Force Between 10ft Supports:  6.0 lb
Contact Arrangement: 2 NO + 2 NC (make-before-break)
NEMA, UL IP Class:  4X IP65
Reset Type:  Manual

Environmental Temperature Range
Operating: +32°F to +131°F (0°C to +55°C)
Storage: -40°F to +185°F (-40°C to +85°C)
Note: Operating temperatures at 0°C are based on the absence of freezing moisture and liquids.

Contact blocks and flags are field replaceable