Features
The following switches are hand operated, spring llatchable, control circuit devices, rated ‘Heavy Duty’ normally for use with electromagnetic equipment. The body and some of the plunger heads are painted with a dry powder paint, and made from die-cast zinc. The plastic plungers are molded from DuPont Delrin 100ST Acetal for improved impact resistance and are solid colors throughout.
- Gold plated contacts eliminate high resistance tarnishing
- NEMA 12/13, IP65
The plated steel latch plate on the 02510-001 and 03476-001 has a 0.31" hole for insertion of a padlock.
Each captive terminal will accept (2) #14 AWG stranded wires.. Each switch is supplied with mounting hardware and a solid neoprene rubber gasket which provides an oil tight seal upon installation. The mechanical life of these devices is 500,000 operations.
These switches can be found in a variety of uses on industrial machines. Presses and press brakes use them as “STOP” or "START" buttons.
WARNING: USER MUST VERIFY COMPATIBILITY OF ANY LOCKING DEVICE USED WITH THESE SWITCHES
Please note: Not all combinations are valid.
Operating Force: 9.5 lb
Latch/Plunger Operation: Push to Latch,Travel limited from neutral to depressed.
Push latch to return to normal
Contact Type: Slow-Make / Slow-Break
Contact Arrangement: #9 NO-NC Positive Break
Electrical Ratings
"HEAVY DUTY - A600 / N300”
Listed under UL 508 - File # E 58589
Certified under CSA C22.2 - File # LR 3648
CE Compliant IEC/EN 60947-5-1
Third party certified under DEMKO Certificate # D-01496-M1
Environmental Temperature Range
Operating: +32°F to +131°F (0°C to +55°C)
Storage: -40°F to +185°F (-40°C to +85°C)
Note: Operating temperatures at 0°C are based on the absence of freezing moisture and liquids.
When mounting lockable switches on a panel or on a Rees enclosure, where additional space is required for the lock, you may need to order a Rees gasket “spacer”, part number 01004-045.
Can be mounted in standard REES Standard enclosures.
Plungers and contacts are not field replaceable.
Features
The following switches are hand operated, spring llatchable, control circuit devices, rated ‘Heavy Duty’ normally for use with electromagnetic equipment. The body and some of the plunger heads are painted with a dry powder paint, and made from die-cast zinc. The plastic plungers are molded from DuPont Delrin 100ST Acetal for improved impact resistance and are solid colors throughout.
- Gold plated contacts eliminate high resistance tarnishing
- NEMA 12/13, IP65
The plated steel latch plate on the 02510-001 and 03476-001 has a 0.31" hole for insertion of a padlock.
Each captive terminal will accept (2) #14 AWG stranded wires.. Each switch is supplied with mounting hardware and a solid neoprene rubber gasket which provides an oil tight seal upon installation. The mechanical life of these devices is 500,000 operations.
These switches can be found in a variety of uses on industrial machines. Presses and press brakes use them as “STOP” or "START" buttons.
WARNING: USER MUST VERIFY COMPATIBILITY OF ANY LOCKING DEVICE USED WITH THESE SWITCHES
Please note: Not all combinations are valid.
Operating Force: 9.5 lb
Latch/Plunger Operation: Push to Latch,Travel limited from neutral to depressed.
Push latch to return to normal
Contact Type: Slow-Make / Slow-Break
Contact Arrangement: #9 NO-NC Positive Break
Electrical Ratings
"HEAVY DUTY - A600 / N300”
Listed under UL 508 - File # E 58589
Certified under CSA C22.2 - File # LR 3648
CE Compliant IEC/EN 60947-5-1
Third party certified under DEMKO Certificate # D-01496-M1
Environmental Temperature Range
Operating: +32°F to +131°F (0°C to +55°C)
Storage: -40°F to +185°F (-40°C to +85°C)
Note: Operating temperatures at 0°C are based on the absence of freezing moisture and liquids.
When mounting lockable switches on a panel or on a Rees enclosure, where additional space is required for the lock, you may need to order a Rees gasket “spacer”, part number 01004-045.
Can be mounted in standard REES Standard enclosures.
Plungers and contacts are not field replaceable.
Features
The following switches are hand operated, spring llatchable, control circuit devices, rated ‘Heavy Duty’ normally for use with electromagnetic equipment. The body and some of the plunger heads are painted with a dry powder paint, and made from die-cast zinc. The plastic plungers are molded from DuPont Delrin 100ST Acetal for improved impact resistance and are solid colors throughout.
- Gold plated contacts eliminate high resistance tarnishing
- NEMA 12/13, IP65
The plated steel latch plate on the 02510-001 and 03476-001 has a 0.31" hole for insertion of a padlock.
Each captive terminal will accept (2) #14 AWG stranded wires.. Each switch is supplied with mounting hardware and a solid neoprene rubber gasket which provides an oil tight seal upon installation. The mechanical life of these devices is 500,000 operations.
These switches can be found in a variety of uses on industrial machines. Presses and press brakes use them as “STOP” or "START" buttons.
WARNING: USER MUST VERIFY COMPATIBILITY OF ANY LOCKING DEVICE USED WITH THESE SWITCHES
Please note: Not all combinations are valid.
Operating Force: 9.5 lb
Latch/Plunger Operation: Push to Latch,Travel limited from neutral to depressed.
Push latch to return to normal
Contact Type: Slow-Make / Slow-Break
Contact Arrangement: #9 NO-NC Positive Break
Electrical Ratings
"HEAVY DUTY - A600 / N300”
Listed under UL 508 - File # E 58589
Certified under CSA C22.2 - File # LR 3648
CE Compliant IEC/EN 60947-5-1
Third party certified under DEMKO Certificate # D-01496-M1
Environmental Temperature Range
Operating: +32°F to +131°F (0°C to +55°C)
Storage: -40°F to +185°F (-40°C to +85°C)
Note: Operating temperatures at 0°C are based on the absence of freezing moisture and liquids.
When mounting lockable switches on a panel or on a Rees enclosure, where additional space is required for the lock, you may need to order a Rees gasket “spacer”, part number 01004-045.
Can be mounted in standard REES Standard enclosures.
Plungers and contacts are not field replaceable.
Features
The following switches are hand operated, spring llatchable, control circuit devices, rated ‘Heavy Duty’ normally for use with electromagnetic equipment. The body and some of the plunger heads are painted with a dry powder paint, and made from die-cast zinc. The plastic plungers are molded from DuPont Delrin 100ST Acetal for improved impact resistance and are solid colors throughout.
- Gold plated contacts eliminate high resistance tarnishing
- NEMA 12/13, IP65
The plated steel latch plate on the 02510-001 and 03476-001 has a 0.31" hole for insertion of a padlock.
Each captive terminal will accept (2) #14 AWG stranded wires.. Each switch is supplied with mounting hardware and a solid neoprene rubber gasket which provides an oil tight seal upon installation. The mechanical life of these devices is 500,000 operations.
These switches can be found in a variety of uses on industrial machines. Presses and press brakes use them as “STOP” or "START" buttons.
WARNING: USER MUST VERIFY COMPATIBILITY OF ANY LOCKING DEVICE USED WITH THESE SWITCHES
Please note: Not all combinations are valid.
Operating Force: 9.5 lb
Latch/Plunger Operation: Push to Latch,Travel limited from neutral to depressed.
Push latch to return to normal
Contact Type: Slow-Make / Slow-Break
Contact Arrangement: #9 NO-NC Positive Break
Electrical Ratings
"HEAVY DUTY - A600 / N300”
Listed under UL 508 - File # E 58589
Certified under CSA C22.2 - File # LR 3648
CE Compliant IEC/EN 60947-5-1
Third party certified under DEMKO Certificate # D-01496-M1
Environmental Temperature Range
Operating: +32°F to +131°F (0°C to +55°C)
Storage: -40°F to +185°F (-40°C to +85°C)
Note: Operating temperatures at 0°C are based on the absence of freezing moisture and liquids.
When mounting lockable switches on a panel or on a Rees enclosure, where additional space is required for the lock, you may need to order a Rees gasket “spacer”, part number 01004-045.
Can be mounted in standard REES Standard enclosures.
Plungers and contacts are not field replaceable.
