autotech  

 

M8251 Series PLS

The PLS module uses a resolver coupled to the press drive train for getting press position information.

The module constantly reads & decodes resolver signals, and then turns up to 16 PLS outputs on and off based on user programmed set points.

The whole operation is much faster and is independant of the PLC.

 

M7251 PLS

The PLS module uses a resolver coupled to the press drive train for getting press position information.

The module constantly reads & decodes resolver signals, and then turns up to 16 PLS outputs on and off based on user programmed set points.

The whole operation is much faster and is independant of the PLC.

 

DPPLS

The M7251 DPPLS module offers a highly integrated PLC plug-in module with 16 outputs PLS, 13 input Die Protection, Brake Monitor, and Motion Detector, all in one module.

The PLS function has the same advanced features as those available in M7251 PLS module.

 

M8350 Series Position Feedback BusModules

A PLC controlling a press needs press position feedback all the time.

The two most common ways to provide position-feedback are an optical encoder with a counter card, and a resolver with a decoder.

AVG-Autotech offers a versatile resolver based position feedback system.

 

M7350 Series Position Feedback BusModules

A PLC controlling a press needs slide position feedback all the time.

Two of the most common ways to provide position-feedback are an optical encoder with a counter card, or a resolver with a decoder.

AVG-Autotech offers a versatile resolver based position feedback system.

 

Shut Height Feedback BusModule

A PLC controlling press functions requires the press shut height information. AVG-Autotech's Dual Resolver module is a convenient way to input press shut height to PLCs.

The module takes up only one slot in the PLCs supported.The module talks to the PLCs through several I/O registers.

The position read from the module can be scaled and displayed on an operator interface for indication.

 

M7450 Load Monitor BusModule

The Load Monitor BusModule is a PLC plug-in module to monitor load on a mechanical press.

The module measures load through the load sensors mounted on the load bearing members of the press.

The module compares the measured load against user programmed limits for press protection, Die protection and for process trend.

back to Autotech Controls

 


Manufacturing Solutions, Inc. - Corporate Ofice
P.O. Box 427
Lawrenceburg, TN  38464
Office:  (931) 762-8773
Fax:  (931)766-0083

sales@mfg-sol.com

 
email to sales@mfg-sol.com